Skip to content
Chennai · Nagpur · GurugramService locationsFAQs
Dust Suppression Systems Co homeGet a quote
Applications · Material handling

Dust suppression system for material handling units

Wherever bulk material is dropped, loaded or reclaimed, dust is released. We treat each handling point with the method that suits the material and the amount of enclosure available.

Material handling
CoversTransfer, loading, storage, reclaim
MaterialsCoal, ore, limestone, clinker, grain, fertiliser
MethodsDry fog, spray, dedusting
ApproachContain first, then suppress

Dust suppression for stacker and reclaimer

Dust Suppression Systems can be an extremely cost-effective alternative to Dust Extraction Systems for fugitive dust control, particularly in bulk material handling plants. At times, it is the only solution when it comes to large dust-prone areas and stockpiles, which cannot be controlled by dust extraction for practical and economic reasons. It can be deployed in Stacker and Stacker Reclaimers.

The inclusion of Dust Suppression Systems has become a standard, and is today an integral part of a material handling system to prevent fugitive dust nuisance which violates environmental norms adversely affects plant and machinery life & operation and reduces workplace productivity. The system also has a payback as it prevents loss of raw material during handling, and also provides the additional benefit of not having a secondary pollution problem as the dust is retained in the material itself.

Tags: dust suppression system for stacker and Reclaimer

Selection guide

Handling points and how they are treated

Dust in bulk material handling is released in short bursts at predictable places.

  • Truck and wagon unloading: fog rings triggered by each tip
  • Conveyor transfers: nozzles inside sealed chutes, belt-interlocked
  • Bunkers and silos: vent filters or dedusting connections
  • Stacking and reclaiming: fog cannons and zoned sprinklers
  • Indoor sheds: dry fog or extraction to keep floors dry
How we deliver

From enquiry to a working system

01

Share the problem

Send photographs, a layout or a short description of where the dust comes from.

02

Site study

We review each source, the material, water and power available, and any moisture limits.

03

Design and quote

You receive a layout, equipment list and price for the system that fits.

04

Install and support

We supply, install and commission, train your operators and stay available for service.

Ready to get started? Let’s discuss your project.

Send photos or a layout of the dust source. An engineer will recommend a system and send a budget price.

FAQ

Frequently asked questions

Have a different question? Ask our engineers.

How do you control dust in bulk material handling?

Seal and enclose transfer points, suppress with fog or spray at the point of release, and extract where the material must stay dry.

Which is more cost-effective: suppression or collection?

Suppression usually costs less to install and run at open sources. Collection is justified where dust must be recovered dry or the source is enclosed.

Get a recommendation

Tell us where the dust is. We will tell you what fits.

Send the basics and an engineer will come back with a recommendation and a budget price.

  • No-obligation budgetary proposal
  • Design matched to your material and site
  • Supply, installation and service