Controls airborne dust at the source
The mist curtain helps stop dust before it spreads across nearby work areas.
A fog curtain is a line of nozzles that forms a wall of fine mist across an opening. Dust that tries to leave has to pass through it.

Fog curtain dust suppression is a targeted dust control method that uses a fine mist barrier to capture airborne particles before they spread.It is suitable for crushers, conveyor transfer points, loading areas, hoppers, screens, stockyards, and other process zones where focused dust control is needed.We provide application-based fog curtain dust suppression systems with proper nozzle selection, mist arrangement, and site-specific installation for effective industrial performance.
Fog curtain dust suppression is a system that forms a continuous barrier of fine mist across the path of airborne dust. As dust particles pass through this mist curtain, they combine with the droplets, become heavier, and settle instead of remaining suspended in the air.This type of system is especially effective where dust moves through a defined path, such as transfer stations, crusher discharge points, conveyor loading sections, hopper openings, and enclosed process areas. Because it intercepts airborne dust directly, it provides more targeted control than general spraying methods.
The mist curtain helps stop dust before it spreads across nearby work areas.
By reducing suspended dust particles, the system supports a cleaner environment in process and handling zones.
Lower dust levels improve visibility and reduce dust exposure in active operational areas.
When dust is captured early, less dust reaches nearby machinery, structures, and electrical panels.
Fine mist application allows effective suppression without excessive water discharge.
A fog curtain system uses specially selected nozzles to produce a line of fine droplets across the dust source or dust travel path. These nozzles are positioned in a way that creates a uniform mist curtain across the width of the dust zone. When airborne particles pass through this barrier, the droplets bind with the dust and pull it downward.
A reliable fog curtain system should include:
The mist curtain intercepts dust directly in its path and improves suppression efficiency.
Unlike wide-area spraying, the system focuses only on the dust-generating zone.
Fine mist application reduces unnecessary water use.
Less airborne dust helps keep surrounding process areas cleaner.
Fog curtain systems can be installed in narrow, enclosed, or process-specific sections where broader systems may not be practical.
Cleaner process areas improve maintenance conditions and day-to-day operation.
We design each system based on actual dust source points, airflow conditions, and process layout.
Our systems are planned for crushers, hoppers, conveyors, transfer points, and other critical dust-generating areas.
We use suitable nozzle selection and layout planning to create an effective mist curtain for better dust capture.
Our systems focus on controlled mist application instead of unnecessary water discharge.
We use reliable industrial-grade components suitable for demanding site conditions
We provide fog curtain systems for mining, cement, steel, coal handling, recycling, and bulk material processing plants.
A curtain is chosen when the dust source can be boxed in on most sides, leaving one opening.
Send photographs, a layout or a short description of where the dust comes from.
We review each source, the material, water and power available, and any moisture limits.
You receive a layout, equipment list and price for the system that fits.
We supply, install and commission, train your operators and stay available for service.
Send photos or a layout of the dust source. An engineer will recommend a system and send a budget price.
Fog curtain dust suppression is a system that creates a fine mist barrier to capture airborne dust particles and bring them down before they spread.
It is commonly used at crushers, conveyor transfer points, hoppers, loading areas, screen sections, and other localized dust-generating zones.
The system forms a curtain of fine mist across the dust path. As dust passes through the mist, the particles combine with droplets and settle down.
In targeted applications, yes. It provides more controlled dust capture and uses water more efficiently than general spraying methods.
Yes. It is widely used in crusher plants, transfer points, and hopper sections to control airborne dust.
No. A properly designed fog curtain system uses fine droplets and controlled flow for efficient water use.
Yes. It can be connected with timers, control panels, or process-linked automation depending on the application.
A row of nozzles producing a continuous sheet of fine mist across an opening, so dust is captured as it tries to escape.
It captures most airborne dust passing through it. It works best with side enclosure and when wind is not blowing straight through the opening.
Send the basics and an engineer will come back with a recommendation and a budget price.