Skip to content
Chennai · Nagpur · GurugramService locationsFAQs
Dust Suppression Systems Co homeGet a quote
Industries · Cement

Cement plant dust control systems

A cement plant handles dusty material at every stage, from limestone blasting to bagged cement. We supply dust suppression and dedusting systems for the points where fugitive dust escapes.

Dust control in a cement plant
CoversQuarry, crusher, raw material yard, clinker, coal, packing
SuppressionDry fog, water spray, sprinklers, fog cannons
CollectionBag filters and dedusting at enclosed points
Process careMoisture addition kept within process limits
The problem

Where fugitive dust escapes in a cement plant

Stack emissions are handled by the main process filters. The dust that settles on roads, roofs and neighbours mostly comes from open handling points.

  • Limestone crusher hopper, crusher discharge and screens
  • Conveyor transfer points and stacker-reclaimers
  • Raw material, coal and additive stockyards
  • Clinker transport, silo discharge and truck loading
  • Packing plant, bag loading and unpaved plant roads
Our approach

Systems by plant area

Each area gets the method that controls dust without upsetting the process.

Crusher and transfer points: dry fog

Fog captures airborne dust at the hopper and transfer chutes while adding very little moisture to the limestone.

Dry fog system

Clinker and cement handling: dedusting

Hot clinker and finished cement must stay dry, so dust is extracted and filtered instead of sprayed.

Dedusting systems

Roads and open areas: fog cannons and road systems

Mist cannons and road sprinklers control dust from traffic.

Haul roads

Compliance and housekeeping

Regulators and neighbours judge a cement plant by what they can see: dust plumes at transfer points and deposits outside the boundary. Controlling fugitive sources also cuts material loss and bearing wear, and it reduces the load on housekeeping crews.

How we deliver

From enquiry to a working system

01

Share the problem

Send photographs, a layout or a short description of where the dust comes from.

02

Site study

We review each source, the material, water and power available, and any moisture limits.

03

Design and quote

You receive a layout, equipment list and price for the system that fits.

04

Install and support

We supply, install and commission, train your operators and stay available for service.

Keep exploring

Related systems and applications

Ready to get started? Let’s discuss your project.

Send photos or a layout of the dust source. An engineer will recommend a system and send a budget price.

FAQ

Frequently asked questions

Have a different question? Ask our engineers.

How is dust controlled in the cement industry?

Process gas is cleaned by bag filters or electrostatic precipitators. Fugitive dust from crushers, transfers, yards and roads is controlled with dry fog, water spray, sprinklers and local dedusting.

Can water be sprayed on clinker or cement?

No. Clinker and cement react with water, so those points use enclosure and dust extraction. Water-based suppression is used on limestone, coal, additives and roads.

Does dry fog increase the moisture of limestone?

Only marginally. Dry fog adds a very small amount of water compared with conventional spray, which is why it is preferred ahead of the raw mill.

Do you retrofit systems in a running plant?

Yes. Most work is done on a running plant, with tie-ins scheduled during planned stoppages.

Get a recommendation

Tell us where the dust is. We will tell you what fits.

Send the basics and an engineer will come back with a recommendation and a budget price.

  • No-obligation budgetary proposal
  • Design matched to your material and site
  • Supply, installation and service