Skip to content
Chennai · Nagpur · GurugramService locationsFAQs
Dust Suppression Systems Co homeGet a quote
Applications · Construction & demolition

Construction and demolition dust suppression

Construction dust is the complaint that reaches the authorities fastest. We supply dust suppression equipment that keeps demolition, excavation and site traffic under control with a fraction of the water a hose uses.

Construction site with earthmoving equipment
EquipmentFog cannons, mobile units, misting lines
CoversDemolition, excavation, batching, site roads
WaterFine mist uses far less than hosing
FormatSupplied to own or for project duration
The problem

Dust sources on a building site

The dust that causes trouble is the fine fraction that drifts past the hoarding, and much of it can contain respirable silica from concrete, brick and stone.

  • Demolition by breaker, crusher or high-reach machine
  • Excavation, loading and stockpiling of spoil
  • Concrete cutting, grinding and breaking
  • Trucks on unpaved site roads and at the gate
  • Batching plant and cement handling
Our approach

Equipment for construction dust

Everything here is quick to deploy and easy to move as the site changes.

Fog cannons for demolition fronts

A cannon throws fine mist onto the working face from a safe distance and follows the machine.

Commercial fog cannons

Perimeter misting lines

Nozzle lines along hoardings and scaffolding form a mist barrier towards neighbours.

Fog curtain

Site road and gate systems

Sprinklers on haul routes and at the exit keep mud and dust off public roads.

Haul roads

Occupied buildings and tight sites

Where demolition happens next to occupied buildings, mist droplet size matters: fine enough to capture dust, not so heavy that it runs down facades or floods basements. Cannons with adjustable flow and remote control let the operator match output to the task.

How we deliver

From enquiry to a working system

01

Share the problem

Send photographs, a layout or a short description of where the dust comes from.

02

Site study

We review each source, the material, water and power available, and any moisture limits.

03

Design and quote

You receive a layout, equipment list and price for the system that fits.

04

Install and support

We supply, install and commission, train your operators and stay available for service.

Ready to get started? Let’s discuss your project.

Send photos or a layout of the dust source. An engineer will recommend a system and send a budget price.

FAQ

Frequently asked questions

Have a different question? Ask our engineers.

What is the best dust suppression for demolition work?

A fog cannon aimed at the working face, supported by misting along the site boundary and damp haul roads. For small works a compact trailer unit is usually enough.

How does a fog cannon compare with a water hose?

A hose produces large droplets that wet surfaces but miss fine airborne dust, and it uses a lot of water. A cannon produces fine droplets that capture airborne dust over a wide area with less water.

Do you supply equipment for short projects?

Yes. Tell us the project duration and we will advise on the most economical way to equip it.

Does mist affect concrete or finishes?

Fine mist adds very little water to surfaces, but spray should be directed away from fresh concrete, coatings and electrical work.

Get a recommendation

Tell us where the dust is. We will tell you what fits.

Send the basics and an engineer will come back with a recommendation and a budget price.

  • No-obligation budgetary proposal
  • Design matched to your material and site
  • Supply, installation and service