Skip to content
Chennai · Nagpur · GurugramService locationsFAQs
Dust Suppression Systems Co homeGet a quote
Resources

Dust suppression FAQs

Straight answers to the questions we are asked most often. If yours is not here, send it to us.

FAQ

Choosing a system

What is the difference between dust suppression and dust collection?

Suppression uses water droplets or fog to make dust settle at its source. Collection draws dusty air through a filter and keeps the material dry. Open sources usually suit suppression; enclosed or moisture-sensitive ones suit collection.

What is the difference between dry fog, wet fog and water spray?

Dry fog uses compressed air to make the finest droplets and adds almost no moisture. Wet fog or misting uses a high-pressure pump only and suits open areas. Water spray uses larger droplets to wet the material itself.

When should I use a fog cannon?

When the dust source is large, open or moving, such as a stockyard, loading area, demolition front or ship unloading.

Are sprinklers enough for a stockyard?

Sprinklers keep pile surfaces damp. For dust released during stacking and reclaiming, add fog cannons, and consider wind fencing on exposed sites.

FAQ

Water, power and chemicals

How much water does a dust suppression system use?

It varies with the method and area. Fog systems use the least, sprinklers the most. Zoning and automation make the biggest difference to total consumption.

Can recycled or treated water be used?

Often yes for sprinklers and coarse sprays, with suitable filtration. Fine fog nozzles need clean water to avoid blockage.

Do I need dust suppression chemicals?

Only where water alone is not enough: hydrophobic dust such as fine coal, roads that dry out quickly, or piles that must stay stable for weeks.

What power supply is needed?

Pumps and cannons need three-phase power. Mobile units can be supplied with a generator.

FAQ

Installation and upkeep

Can a system be installed without shutting down the plant?

Most of the work is done alongside running equipment. Short stoppages are needed only for final connections.

What maintenance does a system need?

Regular checks of filters, nozzle spray patterns, pump oil and pressure, and valve operation. A simple weekly routine prevents most problems.

Can an existing system be upgraded or automated?

Yes. Nozzles, pumps and controls can be replaced or added, and manual systems can be automated with valves, sensors and a control panel.

Do you provide service after installation?

Yes. We provide commissioning, operator training, spares and service support.

Get a recommendation

Tell us where the dust is. We will tell you what fits.

Send the basics and an engineer will come back with a recommendation and a budget price.

  • No-obligation budgetary proposal
  • Design matched to your material and site
  • Supply, installation and service