Skip to content
Chennai · Nagpur · GurugramService locationsFAQs
Dust Suppression Systems Co homeGet a quote
Industries · Ports & terminals

Dust suppression systems for ports and bulk terminals

Ports handle coal, ore, clinker, fertiliser and grain in the open, in the wind, next to towns. Port dust suppression has to cope with all three and still keep pace with the unloading rate.

Port and bulk terminal
CargoCoal, iron ore, bauxite, clinker, fertiliser, grain
PointsHoppers, conveyors, stackyards, truck and wagon loading
MethodsDry fog, fog cannons, sprinklers, wind fences
ConditionsDesigned for coastal wind and corrosion
The problem

Where port dust is generated

Each transfer between ship, hopper, conveyor, stockpile and truck is a dust source, and sea breeze carries it inland.

  • Grab discharge into quay hoppers
  • Conveyor transfers and stacker-reclaimers
  • Open stackyards exposed to wind
  • Truck and wagon loading
  • Spillage ground into dust by vehicles on the quay
Our approach

Systems for each handling step

Equipment is specified with coastal corrosion and washdown in mind.

Dry fog on quay hoppers

A fog ring at the hopper mouth captures the plume from each grab discharge.

Hoppers & unloading

Stackyard sprinklers and wind fences

Zoned rain guns over the piles with porous fencing on the windward side.

Stockpiles & stockyards

Cargo-specific care

Some cargoes must not be wetted. Fertiliser, clinker and grain are handled with enclosure and extraction, while coal and ores take fog and spray. We ask for the cargo list first, because it decides which method goes where.

How we deliver

From enquiry to a working system

01

Share the problem

Send photographs, a layout or a short description of where the dust comes from.

02

Site study

We review each source, the material, water and power available, and any moisture limits.

03

Design and quote

You receive a layout, equipment list and price for the system that fits.

04

Install and support

We supply, install and commission, train your operators and stay available for service.

Ready to get started? Let’s discuss your project.

Send photos or a layout of the dust source. An engineer will recommend a system and send a budget price.

FAQ

Frequently asked questions

Have a different question? Ask our engineers.

How is dust controlled during ship unloading?

With dry fog rings on the quay hoppers, enclosure and fog at conveyor transfers, and fog cannons covering the grab path where needed.

Can the system handle sea-water or brackish supply?

Material selection changes for saline water, and fine nozzles normally need fresh or treated water. Tell us your water source.

Do wind fences work at ports?

They reduce wind speed across stackyards, which lowers dust lift-off. They are used together with surface wetting.

Can cannons be moved between berths?

Yes. Trailer or truck-mounted cannons are common at multi-berth terminals.

Get a recommendation

Tell us where the dust is. We will tell you what fits.

Send the basics and an engineer will come back with a recommendation and a budget price.

  • No-obligation budgetary proposal
  • Design matched to your material and site
  • Supply, installation and service