Dust collectors for mills and elevators
Bag or cartridge collectors on mills, sifters, elevator heads and conveyors, sized for the dust load.
Dust collectorsGrain, flour and biomass dusts are combustible, and the product is spoiled by too much moisture. Dust control here leans on collection and extraction, with water-based suppression used only where it is safe to do so.

Fine organic dust can ignite when suspended in air in the right concentration. That makes housekeeping and capture at source a safety matter, not only an air-quality one.
We start with the points that release the most dust and work outwards.
Bag or cartridge collectors on mills, sifters, elevator heads and conveyors, sized for the dust load.
Dust collectorsHoods around the pit draw dust away during tipping.
Dedusting systemsWhere product moisture limits allow, a light fog at the pit mouth captures the tipping plume.
Hoppers & unloadingSprinklers and fog cannons for chip and bagasse yards, zoned to avoid over-wetting.
Stockpiles & stockyardsEquipment handling combustible dust needs explosion protection such as venting, isolation and suitable electrical equipment, specified by a competent person for your site. Tell us about any hazardous-area classification when you enquire so that the right equipment is offered.
Send photographs, a layout or a short description of where the dust comes from.
We review each source, the material, water and power available, and any moisture limits.
You receive a layout, equipment list and price for the system that fits.
We supply, install and commission, train your operators and stay available for service.
Send photos or a layout of the dust source. An engineer will recommend a system and send a budget price.
Pulse-jet bag filters and cartridge collectors are the usual choice on mills, sifters and conveying, with explosion protection suited to flour dust.
Only in limited, well-controlled amounts and where the product specification allows it. Extraction is normally preferred.
Extraction at conveyors, screens and mills, with sprinklers or fog cannons on outdoor fuel yards and unloading areas.
It is combustible. A cloud of fine dust in an enclosed space can ignite, so capture at source and regular cleaning are essential.
Send the basics and an engineer will come back with a recommendation and a budget price.